Home  Capabilities  Climate control

Application Areas   Analysis of principle development construction versions in earlier phases Visualisation of basic failure modes Development analysis for optimising the construction (parameter studies) Analysis of customer specific upgrade versions Technical analysis to solve problems     Project structure   Identification and check of the necessary input information Agreement on the simulation target Quotation stage Order placement Construction of a simulation model Calculations and the intermediate results Analysis of the silmulation restults Simulation report, explaination and summary     Example project: Basic air flow with front air intake below the cards   System subrack 4 U by 500 mm deep Without corrective measures, narrow main flow and hot spot through air movement in the front area Solution via special perforated metal sheet     Example project: Cabinet simulation with installed subracks model     Cabinet height: 2200 mm, width: 600 mm, depth: 800 mm Temperature gradiant Air flow         Example project: Subrack - simulation model with down to component level on boards     board size: 6 U by 160 mm deep         Example project: Air flow and surface temperatures     Subrack: 10 U by 265 mm deep Optimising several areas Optimising several areas Optimising several areas         Example project: View of temperature behaviour     Cabinet height:2200 mm, width: 600 mm, depth: 800 mm Cabinet temperatures for solar radiation Heating effect from the installed subracks         Example project: View of different operating states     Subrack: 9 U by 280 mm deep Normal operation, fan speed 60% Fan failure; 1 fan 100% speed The two views are based on a different scale.         Example project: Flow views of the simulation models are possible     europacPRO 9 U / 84 HP / 280 mm deep; 2 radial fans on top